ypstars

Invacare Removing a semi-electric hospital bed requires some strength and skill. However, if you have previous experience and know which parts to take off and the buttons you press, you can complete this process on their own. If you work in a hospital or an Invacare bed at home, can be removed when the patient no longer medical bed needs.
Remove Invacare bed mattress.
Click on the coupling of bed in the lower end, and then move in a left to hold it in IV pole.
Pull the spring bed head in the opposite direction of the table. Remove the hooks on the bottom of the spring.
Click on the baby crib shaft out of bed and underneath the frame.
Remove the pin bed latch. To locate this part, look in the tube pull the spring bed head.
Press the button on the electric bed in her opening set and then press the tube in
Hold the bench at the top. Pull up to remove the rivets on the headboard of the bed springs. Repeat this process for separating the springs in the toe area.
Pull the horizontal bed frame by his side. Sometimes at an angle of 45 degrees.
Open the spring of the baby crib head at an angle of 90 degrees so you can stay upright.
Move the foot of the bed springs and head away from each other. This makes the assembly of closures in the center to leave the rivets in the top of the overbed table springs.